Cascade Clutch & Performance llc
Motor Sports Performance Specialists
60648 Barlow Trail
Bend, Oregon
97702
541-419-0500
Owners: Dave & Dorothy Lynn

Contact Us
Our company is based on the belief that our customers needs are of the utmost importance. Our entire team is committed to meeting those needs. As a result, a high percentage of our business is from repeat customers and referrals.  We would welcome the opportunity to earn your trust and deliver you the best service in the industry.

We have state of the art balancing equipment to perform any type of Dynamic Balancing required. We can balance clutches, flywheels, crank shafts, entire motors, or any rotating part up to 165 pounds, 32" in diameter and up to 35" in length. Our equipment has the ability to achieve a ISO balancing quality grade that can exceed G 0.1.  We use the latest in Windows based digital software, "Easy Balance 2.2" Click the Cascade Balancing tab to the left for more information on Dynamic Balancing.

When it comes to performance you have to get the horse power to the ground or it's of little value. There are hundreds of combinations that will work for clutching your Snowmobile, UTV, or ATV.  Most of the time the factory setup is a good start point.  Then we can modify as required to fit your personal needs.  Ready made clutch packages are general and are set up for a specific riders and conditions which may or may not be right for you.

Give us an opportunity to show you your options.  Contact us and we will answer any questions you may have.

We have access to some of the most sophisticated equipment in the industry. If you have a special need or a request for a one off part we can handle most any challenge. Below we are probing a 2011 Polaris clutch to develope more tooling for our clutch servicing department.

Cascade, ID  
Halfway, OR
Future Alpine Assassin
We have access to some of the most sophisticated equipment in the industry. If you have a special need or a request for a one off part we can handle most any challenge. Below we are probing a 2011 Polaris clutch to develop more tooling for our clutch servicing department.